There is no greater threat to a contractor's business than the loss of his or her tools and equipment. Without their tools and equipment, contractors, in an instant, become sidelined and unable to engage in their livelihoods. To help professional contractors better protect mobile assets on jobsites, DEWALT, a leading manufacturer of industrial power tools, developed the MOBILELOCK™ GPS Locator and Anti-Theft Alarm that features state-of-the-art locating capabilities. The MOBILELOCK™ product is a stand alone, portable, wireless locating and alarm system that is easily mounted to equipment using integrated heavy-duty magnets or fastening the unit into place using screws. Unlike other mobile asset protection systems that use radio frequency to locate stolen assets, MOBILELOCK™ features a GPS locator that can help users find stolen or lost assets in real time.

The four sensors built into the MOBILELOCK unit, tamper sensor, door contact sensor, vibration sensor and temperature sensor, can be programmed individually through a phone or the MOBILELOCK™ website to monitor the mobile asset. If an intruder tries to enter a secured area, disturb a piece of protected equipment, or remove the unit from the asset, the alarm activates and a signal is sent over the cellular network.

If the MOBILELOCK™ protected asset is disturbed, the alarm is triggered and the user receives a phone call, text message or email notifying them that there has been a security breach. The user can log onto the MOBILELOCK™ website, enter their personal pass code and then access street maps or satellite imagery showing the approximate location of the MOBILELOCK™ unit. This enables users to quickly recover stolen or lost assets.



Features:
 

Assisted GPS technology provides locating abilities even in most indoor environments

Alarm notification contacts up to three people via phone call or e-mail

User customizable features: built-in sensors such as vibration sensor, door contact sensor, temperature sensor and other features

Weatherproof, impact resistant, heat resistant

No hardwiring

Portable, wireless

Features of the MobileLock Sensors:

TAMPER SENSOR
The tamper sensor is on the back of the MOBILELOCK unit. It is used to notify when someone has tampered with the security system.

IMPORTANT: The tamper sensor will provide notification that the MOBILELOCK unit has been removed from the mounting surface even when the unit is disarmed. The sensor can be deactivated on the website or phone menu system.

VIBRATION SENSOR
The vibration sensor detects vibration on a metal container or movement of heavy equipment. The sensitivity setting is adjustable with 8 being the most sensitive and 1 being the least sensitive. The false alarm filter assists in blocking out false alarms associated with thunder claps, accidental bumping, objects falling on the equipment or container, etc. The false alarm filter has a high, medium, and off setting.

IMPORTANT: When testing, check for both the strength of the vibration and the number of times the vibration occurs. The false alarm filter looks for multiple vibrations over a short period of time and may require a series of vibrations to trip the sensor. After an alarm from the vibration sensor, the sensor is turned off for 15 minutes.

DOOR CONTACT SENSOR
The door contact sensor detects an open door. If the door is open when the MOBILELOCK unit is armed or a closed door is opened when the MOBILELOCK unit is armed, an alarm will occur. After an alarm from the door contact sensor, the sensor is turned off for 15 minutes. Door Contact Magnet Placement Diagram

Place the magnet on the opposite side of the door jam no more than 3/8" (9.5 mm) from the left side of the MOBILELOCK unit.

TEMPERATURE SENSOR
The temperature sensor detects when the temperature rises above or drops below the pre-set temperature threshold. The MOBILELOCK unit has both a high temperature sensor and a low temperature sensor. The temperature range is 0°F–122°F (-17 °C–50 °C). The high temperature sensor is not to be used for fire protection.

NOTE: The temperature reading is approximate. The temperature reading will be ignored at times when the MOBILELOCK unit is in a state known to change its internal temperature (battery charging, etc).

After an alarm from the temperature sensor, the sensor is turned off for 60 minutes. If the temperature of the environment still exceeds the temperature range selected after 60 minutes, another alarm will be sent. This will continue until the MOBILELOCK unit is disarmed.

MOTION DETECTOR SENSOR
The motion detector is available in the DS510K combo kit. It detects movement of heat sources in an enclosed area. The motion detector has a range of 50 feet.

IMPORTANT: Once an alarm condition is signaled, further alarms are inhibited until no motion is sensed for a period of more than 90 seconds. This feature is designed to conserve battery life by ignoring the normal occurrence of motion throughout the day.

Specs:
 

Battery Type: Lithium Ion (rechargeable)

Battery: 4.4 Amp Hr

Run Time: approximately 4 weeks

Size: 5"L x 5"H x 2"D

Cellular Communication: Sprint PCS

Location Technology: QUALCOMM gpsOne



Includes:

DS500 MOBILELOCK GPS Locator with Anti-Theft Alarm (Base Unit)

Power Supply

Door Contact Magnet

Instruction Manual

Quick Start Guide

Service Activation Card

"Protected by MOBILELOCK" Sticker

Service Plan & Activation
Monthly Service Fee: $19.95/month.
Available for use and sale in the US only.

 

Includes: nationwide cellular service, no roaming fees.

Unlimited alarm notifications

5 locates per month (roll-over)

24/7 customer service and tech support

Locate package (50 locates): $25.00
Activation fee: $ 20.00

Uses for this System:


 

Protect Construction Equipment

Protect Appliances

Protect Storage Trailers

Protect Job Site Trailers

Protect Any type of Industrial Equipment

Portable Alarms Testimonial

Police Department Uses MOBILELOCK™ to Track and Recover $237,500.00 in Stolen Construction Equipment in Less Than Two Months.

In Febraury 2007, the Will County Sheriff’s Department of Illinois along with the Tri-County Auto Theft Task Force combined resources to address a widespread issue typically overlooked – jobsite theft. The task force implemented three MOBILELOCK units to identify areas of frequent jobsite theft, capture the thieves and recover the stolen assets. Within two months of using the MOBILELOCK units, the task force caught nine thieves and recovered approximately $237,500.00 in stolen heavy construction equipment.